How Smoking Impacts Your Health Insurance Policy

It’s a well-known      fact that smoking causes an adverse effect on your health. You must have seen the warning message on all cigarette boxes – ‘Smoking is injurious to health’. Smoking tobacco is a root cause of 30% of all cancer deaths and causes 16 times higher risk of heart attack.

There are almost 120 million smokers in India. As per World Health   India accommodates around 12% of the world’s smoking population. The number of men smoking tobacco has increased from 78 million in year 1998 to 108 million in the year 2015. Tobacco consumption is accountable for the death of 6 million people each year. Direct tobacco consumption accounts for over 5 million deaths and 0.6 million deaths are due to exposure to second-hand smoke. Considering serious public health risks, the Government has banned smoking in public places from 2nd October, 2008.

Not only your health, it also causes you to pay higher premiums for a health insurance policy, due to increased health risks and shorter life expectancy. A nonsmoker however, gets premium discounts as a reward to lead a healthy lifestyle. Being a smoker, it is advisable not to hide your smoking habit from your health insurance company, as it helps you to cover the smoking-related health issues.

There is a wide curiosity among people, how smoking impacts the health insurance and its cost. Let’s educate yourself about smoking and its impact on health insurance policy.

Smoking – What It Includes

Smoking includes inhalation of of the smoke of burning tobacco in the form of cigarettes, cigars and  Whether you are an occasional smoker or frequent smoker, you will be considered as a smoker under the health insurance policy.

Smokers can buy health insurance, however an insurance company may charge extra premium or reject your application for insurance, depending on the number of cigarettes you smoke on a regular basis. A smoker may also have to go through additional health check-ups that can help an insurance company to ascertain the risk factor and then charge the premium amount accordingly.

How Smoking Affects Your Health and Insurance Premium

Smoking makes the serious impact on your health, some of them are detailed below.

Circulatory System: Smoking results in increased risk in the heartache and blood pressure. Building up of fatty acids could resulting to atherosclerosis.

Immune System: Smoking results in severe and long lasting illnesses. Smokers are more prone to develop ulcers, cancer, pneumonia, high blood pressure, bronchitis, and other viral/bacterial/fungal infections.

Respiratory System: Smoking may damage lung functions and breathlessness. It may cause damage to the air sacs of the lungs, increased chance of developing chronic bronchitis.

Oral Health: Smoking can lead to tooth loss, tooth staining, gum disease which may increase the risk of tooth decay.

Cancer: Smoking for a long time also causes cancer to various body organs.

When it comes to a health insurance policy, an insurance company considers the magnitude of illnesses and deaths caused due to smoking and that’s why, smokers need to pay higher premiums to avail health insurance cover. Typically, the insurance companies charge around 15 to 20 percent higher from a smoker policyholder. Those who smoke would need to undergo additional medical checks, before the insurer issues you the policy.

Let’s understand the difference of premium between a smoker and non-smoker individual.

(non-smoker) at 30 years of age buys an individual health plan with Rs 5  coverage, for 1 year policy term, the chargeable annual premium amount is Rs 4,656. However,   (smoker) is buying an individual health plan, he is charged with an annual premium amount of Rs 7,552. An increase in premium amount is only due to the fact that   lies in the smoker category of premium. We can see   is paying Rs 2896 extra on account of smoking.

Smoker with Existing Health Problems

If you are a frequent smoker that has caused the symptoms of the declining health condition and getting puzzled whether you can get a health insurance. The answer is yes, the only thing required is to make honest and proper disclosures.

The insurance company will then assess the risk associated with your profile and then decide on terms & conditions and the premium to be charged for providing you a health cover. The premiums charged will be higher and a waiting period will be applied for covering your  -existing diseases. Moreover, if you are seeking an immediate coverage on your deteriorating health condition, you may go for a critical illness policy.


More about pet grooming training?

Are you wanting to learn more about pet grooming training? There are tons of online mobile dog grooming ads of people that want to sell you their latest pet grooming training course be it in an e-book or on video. These pet grooming courses may promise you the moon but the truth is, nothing compares to some good old fashion hands on training and experience.

If you are interested in learning the pet grooming trade, I would highly recommend that you call on local pet grooming salons. You must be willing to start at the bottom of the ladder and work your way up but I would consider it as getting paid to learn a lucrative trade. By taking a job in the pet grooming field you will get to see if this is the career for you before you even spend a dime on pet grooming training courses.

Pet grooming training can be a great career choice for those that have a love of animals. Most of your clientele will consists of dogs but cats are also brought in for grooming or nail care on occasion. While most of the grooming tasks involve bathing and clipping, you will also have to have a basic understanding of general pet care and pet health issues.

Learning how to spot early pet health care issues is a big part of the pet grooming training material. Dogs will typically see their groomer more frequently than their veterinarian and a good pet groomer should be able to alert the owner to any possible pet health care issues. Some common things that pet groomers are trained to spot are skin disorders.


Exhibition Design Companies

There are many different options that every company is going to have when they are attending a trade show. Most business owners do not want to set up a simple table and hand out literature and samples of their products. Exhibition design companies are going to be able to offer creativity, guidance and other types of assistance for companies.

The team will have a lot of ideas that they can present to the owner of the company. It will be very important to make sure that the right message is portrayed also.

Some of these are designed and will portray the wrong message to the potential customers.

Exhibition design companies will meet several times with the company officials to get a good understanding of the company and the type of design that they are looking for.

They will use their creative minds to come up with a plan. This plan is going to be shown to the decision maker at the company.

If they love the design, the construction of the show will begin. They will make it in sections so that it is easily set up and taken down when necessary.

This is something that can be costly to design in the first place, so they want to be able to use it over and over.

Most of the companies will use that design throughout a marketing campaign. Once that campaign is over, they will choose another design to go with their next campaign. It is important to make sure that they catch the attention of potential customers.

They want to portray a positive message about the company also. There are many different types of products and services that a company can be providing.

It does not matter if it is a well-established company or one that is just getting started.



Structures That Replace The Need For Slides

In the previous article, we used scientific methodology to establish that PowerPoint now outnumbers homo sapiens, has become sentient and self-perpetuating, and will soon rise up and trigger the Apocalypse. Happily, there are alternatives.

If you’re brave enough to present without slides (and there are at least 7 reasons why you should – see previous article), there are useful structures available to relieve you of the need for them. These structures are designed to keep you on track and make you look professional.

Let’s start with an important orienting principle:


There is a world of difference between Fact and Message. Most truly effective presentations focus on Message. Most bad ones are bogged down by reams of Facts. Facts are only useful insofar as they help you to support and deliver your message. Beyond that, chuck them. Having the information is only half of your job. Making it come alive is the balance.

With that in mind, here are some options for structures that replace slides:

10 Structures to use in Place of Slides:

Deliver One Strong Message Only

Simplify your message so that there is no need for a complex series of explanatory visuals. Short, sharp and powerful, just like the Gettysburg Address; a 2 minute and 45 second address which helped to determine the course of an entire nation.

2. Deliver three key points only

Three is a magical number. For unfathomable reasons, which psychiatrists recognise but can’t fully explain, human communication is effective when grouped in three’s.

We sometimes refer to Churchill saying, “Blood, sweat and tears.” In reality, he said, “I have nothing to offer my country but blood, sweat, toil and tears.” That’s a set of four. History, however, has decided that three is better, and ‘corrected’ his phrase.

Sets of threes work very well in multiple applications. It can be three main points, three illustrating stories, or three quick examples. It could be three repetitive phrases, like:

“We shall rise, we shall stand, we shall fight!”

Using the Rule of Three is not only elegant, but it simplifies the quantity of information you are required to remember. If you remember three major points, or three major stories, you remember your entire presentation.


Time Management for Physicians: 13 Ways for Hospitalists To Save an Hour

Your patient            list for the day is long, family meetings are scheduled, and you are starting your day 20 minutes late because the dog barfed on your kid’s homework. The triple latte you guzzled on the way in with a mountain dew chaser isn’t going to give you enough energy to get through the day. In addition, your pager is chirping like a manic parrot and your receptionist is waving a stack of messages at you as you stagger by, briefcase heavy with the charts and projects you optimistically thought you’d do.

Short of cloning yourself  Dolly the Lamb, what’s a conscientious doctor to do?  are extremely busy physicians, with large, high acuity patient loads and anxious patients and families. In order to be an effective, caring physician, you need to learn to manage your time.

Following are some tried and true time savers from actual physicians who walk in your shoes:

*Chunk your phone calls and family meetings: Set aside a specific time of day when you return phone calls, rather than interrupting your day constantly to talk to patients and family. It is entirely appropriate to tell a family that you will call at a certain time, and get a number where they will be. Try to do all your phone calls at the same time. A CEO of a company wouldn’t take calls at any given time and nor should you. This not only makes good time management sense, but is good patient care as well. If you have spent lots of time on phone calls before you have finished seeing your patients, you are potentially delaying timely patient care.

Delegate: as a physician, you have a certain skill set that you do best, just as nurses, ward clerks and medical assistants do. Focus on doctoring–let nurses and aides help patients get up and check vital signs. This is not to say that you shouldn’t help patients with daily needs, but remember, if you are consistently doing nurse’s aide duty, you are not doing physician duties.

*Watch chit-chat: Interaction with fellow doctors and staff is one of the things that make our days enjoyable, but watch that you aren’t hanging out at the ward clerk’s desk or in the physician lounge excessively.

*Use email: Use email when ever possible. This avoids endless telephone tag for non-urgent matters.

*Pages: When you are paged, respond to the page, and ask if anyone else wants to speak to you before hanging up. This decreases the amount of times you dial and wait for someone to come to the phone. This is especially important when dealing with the ED as frequently more than one doctor will be paging you at once.

*Charting: for pity’s sake, write legibly. That’s one less page you will get because you took the time to write   carefully so they didn’t call you to ask about the   dose. Carry admission paperwork around with you, so you are not searching for it.

*Computers: drink the  -Aid. Computers are here to stay and your secret war against them is unwinnable. Learn how to type (there’s typing programs you can do at home. My 9 year old learned to type this way, and so can you!) Learn all the short cuts you can on them to speed your charting.

*Computers: part II:  s are a great resource, but you can get sucked into finding TOO MUCH information. Did you really need to know that your patient lists as an allergy because she gets a milk   Once you have found what you need–STOP!

*Patient education: patients need to be educated by us all. Remember, studies have shown that patient material needs to be at the 5th grade level, with simple instructions. Save your long winded   explanation for your medical student and focus on the basics: “your heart doesn’t squeeze blood out very well but we have medicines that will help.” Enlist nurse educators–remember this is part of delegation!

*Start on time! Duh, but do it!

*Try NOT to multitask. Yes, do fill out a form if you are on hold, but don’t write orders while talking to a patient’s family on the phone. Focus on each task deliberately, and it will actually go much faster. Also, talk less and listen more, AND STOP INTERRUPTING! Conversations can be completed faster if you take the time to hear what the person is saying, rather then readying your response, or thinking about something else.

*Patient exams: pay attention to what you are doing. Listen to the lungs, not your pager going off! Ask the   while examining the patient. To bring the meeting to a close, ask if the patient/family has any concerns or questions. When they respond, answer accordingly, and ask “Anything else?” and then stand up and shake hands. Tell them you are available if needed and the nurse can page you if any issues arise.

*Take a break. Get a cup of tea, rest your brain and calm your senses for at least 5 minutes every two hours. Go to the bath room if you need to! A refreshed physician is much more efficient then a frazzled one.




European Vehicles and Can-Bus LED Bulbs: What Are They?

Can-bus stands for controller area network and is a specialized communication network that allows devices within the vehicle to communicate to the cars computer or ECU

With this complex system in place, the driver will be notified of any parts of the vehicle that are not operating within the manufacturers limitations such as non-functioning lights, low tire pressure, parts that are not working correctly, and more. Many modern European vehicles such as Audi, BMW, Porsche, Mercedes-Benz, and more are the most common candidates for can-bus systems; although some of the newer American cars are starting to develop this technology as well. With aftermarket LED lights, vehicles with can-bus systems are not optimized for these lights so special can-bus or “error free” LED bulbs were created to solve this issue. Can-bus LED bulbs solve the problem using three common ways: Raise the wattage using built-in resistors, using higher wattage LED diodes, or raise the wattage using computer circuits within the LED which makes the bulbs non-polar and have a constant and stable power source. While there is no absolute fix for every vehicle and error messages, there are several innovative ways to go about solving it.

The most common way to fix can-bus error messages is to raise the wattage draw of the LED by using resistors. With resistors in place, the current is slowed down at certain points of the circuit which create more load on the light system which mimics the draw of the factory incandescent bulb and therefore prevents the error message from appearing. This is also the least expensive way method of the three, but it does have a setback: Heat issues. Since resistors slow the circuit, the resistor also creates more heat which is the number one enemy of LED diodes. While higher quality LED lights with built-in resistors are available, heat issues still plague them.

Can-bus LED lights can also be created using higher wattage LED diodes instead of the regular 1210 or 5050 LED diodes. High power LED diodes have typically more wattage draw due to the increased output and can easily fool certain vehicles with a lenient can-bus system. These lights are brighter than a number of LEDs out there and the risks of overheating are not as much as can-bus LED lights that have built-in resistors. Unfortunately, since LED lights draw car less power than the conventional filament bulb, high power LEDs are still not creating the same type of draw thanks to their ultra efficient light producing design.

The third and last most common can-bus LED light in this article is the use of electronic circuit chips that use computers (in themselves) to regulate the wattage draw. In addition to being able to control the amount of resistance is created to suit the needs of various systems, it also makes the LED bulb non-polar (able to be installed in any direction and still light up) and provides it with a constant and stable power source. These types of can-bus LED lights are typically more successful at preventing error messages from appearing than the other two alternatives. However, due to these upgrades, these bulbs are typically more costly as well.


LED Home Lighting – Three Good Ways to Get Started

Remember those red faced digital watches of the 70’s and how everyone thought it was such a technical marvel how the red LEDs (Light Emitting Diodes) lit up to show the time?

Who would have thought at the time that LEDs would eventually compete with incandescent and fluorescent lights for a place in our homes as energy saving light sources with fixture lifespans in excess of 8 years. Colored and white LED light sources are commercially known as solid state lighting and have now begun to make inroads into home lighting applications. We’re going to take a look at the three best ways that solid state lighting or LED lights can be used around your home for energy savings and aesthetics.

The first obvious energy saving application for the home can be found in the outdoor illumination of your home. Regular incandescent bulbs that normally soak up sixty watts or more to floodlight or spotlight the exterior of a home can be replaced with an LED light bulb fixture consuming a minimal 5 to 10 watts of energy. How about a 90 watt equivalent floodlight being replaced by a 13 watt LED fixture? Of course, the volume of sales are not yet high enough to bring down per unit costs of LED fixtures to a level so that it becomes a no-brainer decision to use them. LED light fixtures, especially in the higher power outputs (60 watt equivalents and up) run in the $25 to $150 range depending on fixture type, light output, efficiency , spread, and hue of the light it produces. However outdoor home lighting is not so demanding an application and so the less expensive, lower quality but higher powered LED light fixtures may be used for this purpose. Then there are the lower voltage/wattage equivalent LEDs (40 watts and under) which tend to be the most cost effective with prices starting at $8 to $12 and power consumption running from 2 1/2 watts to 8 watts. These are well suited to the second group of uses that we’ll discuss for LED light fixtures in the home.

Smaller areas in the home like hallways, foyers, bathrooms, and kitchen areas can effectively utilize the lower voltage LED fixtures that provide the 15 to 35 watt equivalent and are in the more affordable range of $15 to $25 and consume between 3 watts to 5 watts, a significant energy savings. Many of these fixtures will screw into the standard Edison screw based sockets. When you couple the energy efficiency to the approximately 8 year life of the fixtures you can see that the savings can add up.There are less expensive LED fixtures to be had however these may have a lower level of illumination, or a narrowness in the cone of the illumination, or the light color may be too blue and cold looking. These may be too unattractive for some who prefer the more yellow toned, warmer white LED lighting in their hallways and foyers. This leads us to the third group of LED lighting applications in the home whose narrower light directionality can be put to better use.

The third best way to utilize low voltage LED fixtures is in areas where low level but concentrated lighting is required. Reading lights and desk lamps are perfectly suited for LED fixtures that won’t break your budget. Fireplaces, paintings on a wall, indoor potted plants, and fish tanks are all areas that can be lit with lower voltage LED lighting that is concentrated and focused. LED light fixtures come in a range of white light hues from the steely bluish white (that can be unflattering to skin tones) all the way to a pure yellow light. So you can bathe your wall paintings in a more yellow toned LED light and use the more bluish white type of LED fixture for your fish tank to bring out the vibrant colors of your tropical fish.


The Possibilities Are Endless

LED strip or LED tape is a versatile lighting solution that provides endless possibilities. Let me start by explaining what it actually is:

LED lighting strip in its essence, is a continuous row of LEDs that have been soldered together with resistors to form a circuit. When powered by a power supply or driver, the LEDs produce a seamless light, similar to a fluorescent. LEDs are low voltage and require a DC (direct current supply) which is usually 12 or 24 volt DC. When connecting the strips to a mains voltage power source, the use of a power supply of LED driver must be used. The power of the driver is determined by the wattage and the length of the strip infohatworld

There are three main types of LED strips; the first is none waterproof. This version is the most basic and fragile as the LEDs are placed on a piece of card or plastic without any cover to protect them. The second type silicone coated, this is waterproof and rated at IP65. This version is made up of a similar row of LEDs but is covered by a clear, thin silicone layer. The silicone version is not self adhesive, when sticking this to a surface, double sided tape or an adhesive must be used. The third version, which in my opinion is the best, is the epoxy coated LED strip. This version provides greater protection as the LEDs are sealed and set into the epoxy resin. This version is waterproof, rated at IP65 and self adhesive. The epoxy version infuses the best assets of the other LED strips.

These variants are only the construction of the lighting strips. Within the strips there are many types of LED chips that could be used, ranging from smaller dimmer chips to larger brighter chips. When larger chips are used, the strip needs to be wider to house them. The LED chips that are used in strip lights are called SMD which stands for surface mount device.

LED strip has been used in commercial applications for many years but until recently was deemed too expensive and complicated for household use. As the price of LEDs gradually decreases due to higher demand and mass production, LED strip is now more accessible. Easy to order, plug and play kits allow consumers to fit it themselves and many people are realising the full potential that LED strip has to offer.

One of the fastest growing areas that LED strip is used is under kitchen cabinet use. The benefits of using the lighting strips here is that they can be cut to almost the exact lengths that are required (within 50mm). Basic installations can be done in a matter of minutes as the strips can be stuck directly to the cabinets using the self adhesive backing. Then plug the power supply straight into a standard wall socket and the job is done.

Some commercial projects can get quite complicated, when multiple colour changing strips are used and they all need to be controlled from one main device. This is when a DMX (digital multiplexer) controller must be used as the DMX converts a basic digital signal into a PWM (plus-width modulation) signal. When the strips have been converted into a PWM signal they can then be controlled by computer based software that allows anything from colour changing to scene setting.

For new users to LED strips, the options can seem daunting but most companies have now realised that there is no need to stock every type of strip available when one type will cover most applications. The most universal strip is the epoxy coated with SMD 5050 LEDs. This version is available with 30 LEDs per metre or the super bright 60 LEDs per metre. Even when you have selected your type of strip, different variations exist as they are manufactured in different factories which have different quality control procedures.

Controlling the strip can be done by using a basic on/off switch, a remote control or by using computer based software via a DMX decoder. The most advanced way is to control the lights from an Iphone or smart phone, this allows you to dim or change the colour of the strip in your kitchen from anywhere in the world! This is a great way to frighten the rest of the household when on holiday or working away.

LED strips can be supplied in very short runs ranging from just 50mm up to 100’s of metres. The use of hard wired, heavy duty power supplies must be used on longer runs. Hard wired installations should be done by a qualified electrician but shorter runs (around 10 metres) can be done by almost anyone as no tools or electrical knowledge is required.


The Mordern Supply Chain Model of the LED Light Supplier

For the LED light manufacturer, the general concept of an integrated supply chain is very similar to those of the manufacturers in other industries LED Display

The integrated supply chain model is the context of the management at the organizational level to build a framework of the capacity limitations, information, core competencies, capital, and human resource constraints. In this perspective, the supply chain model of the T8 LED tube manufacturer builds from the effective and efficient working structure and strategy to gain competitive advantage. It help link a company with the customers in terms of the supporting services and valuable products. Therefore, the LED light supplier is able to integrate all business activities from raw material purchases to services and products delivery to the end customers. If the company has a perfect supply chain model, it can win the business more easily.

From the academic perspective, the T8 LED tube light company comprises the supply chain with five critical elements. They are the information, the product, the service, the financial part, and the knowledge. It is also true in the real practice of the wholesale LED bulb products. The logistic is the basis of the integrated supply chain model. The model delivers the product and service within the operations. In such a model, each company is performing the logistical activity. The more effective the model is, the more successful the company is. However, some wholesale LED light firms may not integrate the logistical activity into the overall supply chain performance. The achievement of the logistical integration is always the focus of most wholesale LED tube companies.

Normally, the generalized supply chain arrangement links a company and its suppliers to the end customers. If the LED light supplier wants to win the business, it must pay attention to the integrated value-creation process. The company should manage all activities from the material procurement to the product and service delivery to the end customers.

In the traditional channel arrangements, the T8 LED tube manufacturer loosely links different groups of independent business to buy and sell inventory to each other. At present, the supply chain management improves a lot. It manages the initiatives to increase the market impact, the overall efficiency, the continuous improvement and competitiveness of the LED light manufacturer. In this way, the company can gain its advantage. In practice, many companies do not apply only one type of the models. They apply many complexities of different models to make the directional line diagrams. For instance, the T8 LED tube light firm may take part in many competitive supply chain models. The firms will apply multiple arrangements and will come across the difficult issues of loyalty, when the supply chain becomes the basic element of the competition. Such aspects may include the confidential information and the potential conflict of interest.

The high degree of mobility in typical arrangements is another aspect that will increase the complexity of the supply chain model. It is very important for the wholesale LED light firm to research the fluidity of the total pipeline, to see whether it has clear loss of critical connectivity. Take a wholesale LED bulb company for instance. It may focus more in the supply chain structure during the raw material purchases, especially in the peak season. To know the complex issues of the total pipeline arrangements, the wholesale LED tube company will need to set a resulting structure for the observation, to judge the value net of the output.


Red Pill Philosophy

I’ve never liked philosophy. Okay so, I have admired people like Socrates, Marcus Aurelius, Plato, etc. at one time or the other, but really, philosophy as a course of study? Man, in school, it used to give me headache. As someone once tongue in cheek said, philosophy is the only subject that throws out more questions than it answers (my apologies to any philosophy majors out there).

But on the real, can we really do without philosophy? Na, not really. Not really since it’s in man’s nature to ask questions about life and the nature of it. The true value of Philosophy-the general type anyway, is that it helps us conceptualize ideas about life and through that understand the way certain things work. The red pill genre is no exception.

Recently, I came across the Red Pill Philosophy indirectly through the book “Red Pill Orgasm” by HalfBreed, and for once I was glad to see that after getting the gist of it, I was not left holding my head and looking for an aspirin. Rather  Sex pills for men I found myself eagerly looking forward to practicalizing some of its dictates. Well in so far as it relates to sex anyway. So what is it all about? I’ve given you one clue already but I’m feeling generous- here’s another; “Matrix”.

Yes, you see the term is a throwback to a scene from that film. In that scene Neo the main character, is offered two pills. The blue pill means falling back asleep, accepting lies while the Red Pill means waking up to the truth. Alright good. So whats that got to do with anything?

For that, let’s go back to HalfBreed. HalfBreed’s “Red Pill Orgasm” is a book written about why it’s not only important to give your woman orgasms, how you can actually achieve this regularly but also why contrary to gender equality leanings, you must be the dominant partner as a prelude to achieving this. In the process, it quietly demolishes the standard myths (the blue pill) about gender equality.

According to the author, “… taking the Red Pill means understanding the truth about gender dynamics, women, and feminism in the West. A man digests the Red Pill when he begins using that knowledge to improve his relationships with females”. Interesting. But to be specific, what are the myths?

Treat your woman like an equal, let her have her way, pander to her every whims and caprice. Prioritize the romance approach; cherry scented candles and champagne bubble baths; yada, yada, yada. Not that you can’t incorporate aspects of this heads. Sure you can, but just so long you both know who is boss-You.

How to do this? HalfBreed advocates things like; Never let her control you, Say no to her often, Push back against her wishes, Don’t overly focus on making her happy, Decide for her, Tell her what to do, tell her to shut up, laugh at her, make love to her well, ignore her for extended periods of time. These are all ways of gaining dominance over her. And yet, yet, true to form, while I am all for making love to my girl well (not that I’m doing a bad job of it at the moment), I’m not sure that in my present relationship I’d long get away with all of the things mentioned here.

I think a lot of it has to do with respect. If you have been able to cultivate a woman’s respect, she’ll naturally defer to you and your directives. Where you are not worthy of respect, you may just be stoking up the flame by attempting to deflate her ego in order to boost yours. Maybe that’s the reason HalfBreed also includes the need for you to make more money than her. Yes, and that brings us to another myth. The myth that says she earning more money than you doesn’t matter. Of course it matters.

The more independent she is of you, the harder it will be for you to maintain headship of your home. There might well be other ways of maintaining that position, but there’s no denying that her being financially independent of you will work against rather than for you. On the physical plane, the book Red Pill Orgasm is replete with techniques you can use to assist your partner attain orgasm, and you last longer in bed. Interestingly its approach is a synergistic blend of tantric methods and modern science. The shocking thing though is that he successfully pulls it off. As such, even though it is the puerile that stands to gain most from the book, the experienced stud too may just surprise himself by learning a thing or two.

What interests me here though is extending the whole red pill philosophy to other areas of life. Politics is a ripe field for this. It is also potentially explosive.

Just think about expressing what you really feel about race relations or same-sex partnerships. What about religion? Looking at it scientifically (and mind you I’m just talking), what is the logical basis for believing that the God of the universe incarnated in the image of man and had to die in order to bring man back to himself, or on the flipside that he takes any pleasure in murder committed in his name.

What about some of the holiness band; corrupt or perverted “men of God” with congregations who nevertheless fail to see the light, remaining the staunchest supporters of these, even while they themselves live in abject poverty. Red pill. Yes, just imagine, all of these peoples taking that red pill and waking up to reality, whether that reality turns out to be what they had thought or not. Red Pill philosophy. Yeah, the results would be interesting.

But really, having looked at it, I think it’s not that the concept is new. No, it probably has been with us under various nuances since the dawn of time and man’s earliest consolidations in city states; Ala speaking one’s mind, being frank, etc. The only difference is that in the world and the type of society we live in today, for the sake of peace and quiet, it is just better to be politically correct and follow the path of tolerance and yes sometimes willful blindness.